1. Skin should be dry, clean and free of makeup. For best results choose an area on the skin that's not stretchy. (YES to limbs, body, head, NO to joints with lots of movement like elbows, knuckles, under front of neck, immediately around eyes and mouth.)
  2. Remove clear overlay.
  3. Place/position on skin by pressing tattoo with image side down.
  4. Thoroughly moisten back by holding a wet cloth or sponge to the back of tattoo for 30 seconds
  5. Peel off paper backing to reveal your very own Tattstr!
  6. Rinse image lightly after application and pat dry, do not rub.
Now show off your tattoo for 2 to 4 days! YAY!
    Care for your tattoo after water activities by patting dry. Keep away from alcohol, oils, soaps and suntan lotions. Speaking of tanning, as an fyi if your tattoo is enjoying summer time sun, they will leave tan lines when removed.

    ★  ★  ★  ★  ★  ★  ★  ★  ★  ★

    Tattoo break-up is really hard, but the good news is removal is REALLY EASY! If it's any consolation the good news is you have made room for a new one!

    The best way to remove your Tattstr is by simply using a strip of adhesive tape applied over your tattoo. Rub the applied tape and peel to reveal skin! Out of tape, then use perfume, rubbing alcohol or baby oil and it will peel away with a bit of rubbing.
    ★  ★  ★  ★  ★  ★  ★  ★  ★  ★

    Note: For small print runs we use temporary tattoo papers that comply with Australia
    Standards AS/NZS ISO 8124.3:2003 and for large runs we use only USA FDA approved vegetable based inks. Do not apply tattoos if you have extremely sensitive skin.